Poseidon2 devices are designed to monitor and control sensors and digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Poseidon2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.
HWg-Ares14 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers). Data can be read into HWg-PDMS (free software), connected to a Web portal or to a SCADA/NMS system.
Damocles2 devices are designed to monitor and control digital I/O over the network using secure M2M protocols (HTTPs, IPv6, SNMPv3). With support for over 50 SNMP and SCADA applications, Damocles2 devices can be integrated in a wide range of monitoring and control systems. MQTT protocol enables integration in IoT solutions.
HWg-STE is a device with SNMP support designated for measuring temperature and humidity from external sensors, with the option of connection to the internet via Ethernet. In case the permitted range of values is exceeded, HWg-STE sends an alarm via e-mail or via the SensDesk portal.
In a user defined period the IP WatchDog detects the status of internet connection and LAN connected devices. In case the internet connection or any monitored device stops responding the IP WatchDog can restart up to two connected devices.When the status of any of the monitored channels changes the IP WatchDog2 Industrial can send a notification directly as SNMP Trap as well as Email to two addresses or indirectly through the HWg-SMS-GW3 gateway in the same LAN as a SMS or a Ring to one phone number.
HWg-WLD is a water leak detector connected to the Ethernet. The sensing cable detects as little as a few drops of a liquid, and can be also used to detect condensation. Whenever a liquid is detected, the device sends an e-mail or a SNMP Trap, or uses a central SMS gateway HWg-SMS-GW3 to send a text message.
HWg-PWR devices are designed to monitor external M-Bus meters over the network using M2M protocols (Modbus/TCP, SNMPv1, XML...). With support for over 50 SNMP and SCADA applications, HWg-PWR devices can be used as a standalone solution or incorporated in a wide range of monitoring and control systems.
Damocles2 1208 provides 12 digital dry contact inputs (DI). All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 1208 controls 8 digital open collector outputs (DO).
Damocles2 2404 provides 24 digital inputs (DI) for dry contact detectors. All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 2404 controls 4 digital relay outputs (DO).
Damocles2 MINI provides 4 digital dry contact inputs. All digital inputs feature S0 pulse counters with a memory to connect water, gas, electricity or other meters. Damocles2 MINI controls 2 digital relay outputs (DO).
Ares 10 is a cost-effective GSM thermometer for remote monitoring and alerting over GSM for locations without LAN access. Connect up to 3 external sensors and 2 dry contact detectors.
Ares 12 is an industrial unit for remote monitoring and alarming over GSM for locations without LAN access. Includes battery backup. Connect up to 14 external sensors and 2 dry contact detectors.
The HWg-PWR3/12/25 is a smart Ethernet gateway which captures data from up to 3 / 12 / 25 external meters on the M-Bus. With external M-Bus (EN 13757) meters it can be used for remote monitoring a metering of water, electricity, gas or heat consumption.
HWg-STE can connect up to two sensors via 1-Wire. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk portal in combination with the SensDesk Mobile application. It is supplied with temperature probe, power adaptor and free HWg-PDMS software to create graphs and export data to MS Excel.
HWg-STE can connect up to two sensors via 1-Wire and up to two detectors via digital inputs for dry contacts. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk portal in combination with the SensDesk Mobile application. It is supplied with temperature probe, power adaptor and free HWg-PDMS software to create graphs and export data to MS Excel.
HWg-WLD is a water leak detector connected to the Ethernet. The sensing cable detects as little as a few drops of a liquid, and can be also used to detect condensation. Whenever a liquid is detected, the device sends an e-mail or a SNMP Trap, or uses a central SMS gateway HWg-SMS-GW3 to send a text message.
In a user defined period the IP WatchDog2 Industrial detects the status of internet connection, LAN connected devices and RS-232 connected devices. The IP WatchDog2 Industrial can monitor up to ten channels including up to two RS-232. In case the internet connection or any monitored device stops responding the IP WatchDog2 Industrial can restart up to two connected devices via its 230V/16A NO/NC relay DO.
In a user defined period the IP WatchDog2 Lite detects the status of internet connection and LAN connected devices. The IP WatchDog2 Lite can monitor up to ten channels. In case the internet connection or any monitored device stops responding the IP WatchDog2 Lite can restart up to two connected devices via its AC 50V/0,5A (DC 30V/1A) relay DO.
Poseidon2 3468 supports up to 8 sensors connected over 1-Wire UNI / 1-Wire and up to 4 detectors connected to digital inputs. Poseidon2 3468 can control 2 digital 230 V / 16 A relay outputs, as well as up to 8 virtual digital outputs (VDO) at remote Poseidon2 or Damocles2 units (M2M).
Poseidon2 4002 can connect up to 42 sensors (16 via 1-Wire UNI/1-Wire + 26 via RS-485), provides 12 digital dry contact inputs (DI), 8 virtual digital outputs and allows control of 4 relay outputs (NO/NC).
STE2 can connect up to three sensors via 1-Wire and up to two detectors via digital inputs for dry contacts. A built-in web server is used for configuring. The device can be monitored remotely over the internet using the free SensDesk portal in combination with the SensDesk Mobile application for iOS and Android. It is supplied with free HWg-PDMS software to create graphs and export data to MS Excel.
